DescriptionThe HighPi Pro 5S Case for Raspberry Pi 5 continues the HighPi case line, offering ease of use, flexible configuration, and attractive design. It embraces the upgrades found on the Pi5 board, namely its active cooler, power button, and PCIe port. Lots of space is available for HATs, such as power over ethernet, NVMe storage, or UPS backup boards.WHAT FITS INSIDEWe were very impressed with the Active Cooler that launched with the Pi5, so it was made central in our design. Along with the Pi5 and Active Cooler boards, the case can additionally hold:PoE HATsNVMe HATsUPS HATsAny HAT not requiring input/output ports, up to 14.5mm tall (on top of Active Cooler with 16mm standoffs)If not using the Active Cooler, then the case can accommodate oversized heatsinks or cooling solutions, or any HAT up to 30.5mm above the Pi PCB that does not require input/output ports.FEATURESNEW powerful and controlled cooling using the Raspberry Pi Active Cooler and optimized case ventsNEW power button and external status LED visibilityNEW camera cable slot above ethernet to connect to external camerasNEW secure microSD card cover that is removable from inside the case, and is stored underneath the lid when not in useIndustry-leading ease of use, rapid tool-free assembly and disassemblyLarge internal volume for HATs, break-out boards, or heat sinksVESA or wall-mounting via optional VESA mount kitGPIO ribbon cable portSelf-adhesive rubber feet, set of 4CUSTOMIZATIONIf you have a project that requires 1000 cases, customization of the case to provide input/output ports above the HDMI ports are likely possible. Examples of this include DAC HATs for audio players, serial HATs, or other I/O devices. Custom branding with your logo is also possible. Contact us for more information.ASSEMBLY INSTRUCTIONSThis case is one of the easiest in the market to assemble and disassemble, no tools are required and yet all components are held securely. To assemble the Pi board and case, follow these simple steps:Install the Active Cooler, Real Time Clock, and any other desired add-on boards/HATs on the Raspberry PiSlide the Raspberry Pi board into the front of the case, so that the USB-C and microHDMI ports go into their positionsPress down on the back of the Raspberry Pi board to snap it into the caseInsert the right edge of the lid into the case, then snap down the left sideYou’re done! To remove the lid and Raspberry Pi, simply:Remove the lid by pushing gently on the bump under the hexagon vents, and then pushing upwardRemove the Raspberry Pi board by pulling the snap that secures the board outward without your fingerSPECIFICATIONSMade in China with ABS Plastic External dimensions: 101 x 67 x 42mm Internal volume for breakout boards: 85 x 56 x 30.5mm Dimensional Drawing Lustran 433 Material Sheet Lustran 433 Certification Sheet
