DescriptionThe PiKVM Switch Multiport Extender enables one PiKVM device to view and control multiple computer targets connected to each port from a web UI. Up to five Switch Multiport Extenders can be daisy-chained to provide 20 ports, allowing a single PiKVM to control and manage one of 20 connected targets. ATX statuses and controls are available for all connected targets simultaneously.The PiKVM Switch Multiport Extender is fully plug-and-play. It is compatible with PiKVM models V4 Plus, V3, V2, and V1.CompatibilityRequires one supported and configured PiKVM. List of supported PiKVMs:PiKVM V4 PlusPiKVM V3 PiKVM V2, V1 DIY modelsImportant Note: PiKVM V4 Mini is NOT compatible due to the lack of available USB host ports. The Switch Multiport Extender MUST be operated via the PiKVM interface, as the unit has no built-in controls.FeaturesA competitive & cost-effective solution – A single PiKVM can manage up to five chained switch units, enabling control of multiple targets while minimizing costs and maintenance efforts.Each PiKVM Switch Multiport Extender unit can control 4 targets.Switch functionality integrated into the PiKVM interface – Use the popular interface, now expanded to support the number of targets available through the connected switches.Operational insights with multifunctional status LEDs – Monitor detected targets, selected ports, and the switch’s overall status in real time.Rapid switching – With an advanced HDMI dummy plug function, you can switch between target computers significantly faster than competing solutions!Automatic firmware updates with PiKVM OS – Once PiKVM is updated, the main switch update will simply deploy to its neighbors for version uniformity and improved stability. Video inputs feature dedicated EDID configuration and complete control over the connection state of each port.Ready to use – Includes a power supply, ATX adapters for power and AUX control, brackets, and all the cables needed to get started!SpecificationsPower: – Power Input: 12V, 0.5A DC, 5.5×2.1mm (Power supply is included) – Peak power consumption: Up to 6W (0.5A/12V) – Built-in watchdog circuitryConnectivity/Interfaces: – 4x HDMI input ports: Video source from the target computer – 4x USB-C 2.0 “OTG”: Keyboard and mouse emulation for the target computer – 4x ATX RJ-45: Special port for target power control or AUX – HDMI uplink/downlink: HDMI signal to PiKVM unit or to daisy-chain multiple units – USB-C female “CTL”: Switch management from PiKVM – USB-C female “OTG”: External device emulation/mass storage from PiKVMVideo/Audio: – Supported resolutions: up to 1920×1200@60Hz – Audio capture mode: HDMI audio capture supportEnvironmental: – Operating temperature range: 0°C to 50°C – Storage temperature range: -20°C to 60°CDimensions:121 x 137 x 44mmWeight: 0.6 kgConnectivity1. HDMI video input port4. USB 2.0 OTG connector2. Multifunctional status LED5. RJ45 ATX control port3. Port Number6. HDMI video output port to PiKVM13. Switch Reset button7. Multifunctional status LED (Uplink)14. USB OTG port to PiKVM8. Power Input 12V 0.5A15. Activity LED (Yellow)9. HDMI video input port from other Switch16. Switch Boot button10. Multifunctional status LED (Downlink)17. Power LED (Green)11. Power Output to other Switch18. USB Control port to other Switch12. USB Control port to PiKVM19. USB OTG port to other SwitchContents12V 2A AC Power Supply, International Plugs, DC 5.5x21mmDC Barrel Jack Cable, 5.5×2.1mm 90Deg Male, Black, 30cm2x USB3.0 Cable, USB-C Male, Black, 30cmUSB-A Male To USB-C Female AdapterHDMI 2.0 Cable, Black, 30cm4x ATX Board & Wire Set4x ATX Bracket SetResourcesPiKVM Handbook: Switch Multiport Extender device guide
